SSXYGecko - Dual axis translator for external drives
- 30 MHz Microprocessor Controller.
- User Programmable Baud Rates (9600, 19.2K, 38.4K, 57.6K (default), 115.2K).
- Multiple boards on a single serial port and the ability to intermix Simple Step board types on the network
- On Board network address switch select on every board.
- Choice of the Simple Step® Network RS232 or RS422/RS485 communications.
- Option Connector for later add-on or custom boards.
- Two (2) User Controlled Open Collector Output Lines (1-20 ma and 1-500ma) (per axis).
- Two (2) User Controlled Input Lines (per axis).
- Software Programmable Home Sensor Check (per axis).
- Diode protected Home Sensor (per axis).
- On Board 5 volt Switcher and Power LED.
- Small Board Size 4.725" x 4.15" x 0.9"
- Large Dynamic Velocity range (from 1 step per second to 15,000 steps per second) per motor.
- User Programmable Motor Power Settings (Full/Idle,OFF)
- Synchronous Motor Movements with ALL Boards on the network (Up to 40 motors on 1 serial line)!
- Limit Switch Input (per axis)
- Optical Motor Home input (per axis).
- EMI (radiated) filtering on all boards to allow FCC and CE approvals.
- Prescaler installed on all units.
- User programmable advanced acceleration and deceleration settings based on User Programmable Start Velocity, End Velocity and Slope.
- Bipolar Stepper motor (up to 7.0 amps per phase) or DC Servo drive ( up to 20.0 amps) (per axis).
- Single 7.0 - 50.0VDC operation.
- Controls 2 Gecko Drive G2xx-G3xx, U.S. Digital MD1 or Sanyo Denki Q1-Q2 amps.
- Up to 65534 steps of motion (27.30625 feet with a user mechanical resolution of 0.005 inches per step).
- Decimal or Hexadecimal ASCII numeric values can be used.
- 400 Character IEEPROM buffer for all non-EEPROM versions.
- Jog control for each axis.
- Simple ASCII command set allowing use of standard PC communications packages.
- SSWin Program FREE with each purchase. (Windows 95/98/NT/2000/XP/Vista)
- Optional Internal 2K, 4K, 8K and 16K of User Programmable on board EEPROM (Flash).
- Programming language for EEPROM with decision branches based on User Input States (used with above Option).
- Optional 32 bit movement (2,147,483,647 steps).
- Optional RTOS (Real-Time Operating System).
Prices does not include tax (if applicable), shipping and handling. All options (32, IEEPROM, RTOS) are now based on a flat rate system for all XA Products.
| Qty |
Standard Unit
SSXYGecko |
32 bit |
2K |
4K |
8K |
16K |
RTOS |
| 1 - 9 |
$214.00 (US) |
+$5.00 |
+$4.50 |
+$6.50 |
+$7.00 |
+$8.00 |
+$12.00 |
| 10 - 24 |
$201.00 |
+$4.50 |
+$4.00 |
+$5.80 |
+$6.75 |
+$7.75 |
+$11.50 |
| 25 - 49 |
$180.00 |
+$4.00 |
+$3.50 |
+$5.20 |
+$6.25 |
+$7.25 |
+$11.00 |
| 50-99 |
$161.00 |
+$3.50 |
+$3.00 |
+$4.90 |
+$5.75 |
+$6.75 |
+$10.50 |
Educational :
Automatic 5% off on all prices listed above.
 Click here to download the SSXYGecko Specification sheet in Adobe Version 3.0 PDF
Click here to Download AutoCAD R13 drawing of the SSXYGecko PCB outline.
Download the latest Simple Step Complete manual for all our boards including the General Information Guide in Adobe PDF Version 3.0 Format (1.87M).
Call today for quantity pricing and delivery. Large and small orders are welcome. Simple Step® for Windows included with every purchase. |
|
|
Send mail to webmaster@simplestep.com with questions or comments about this web site.
Copyright © 1997-2009 Simple Step L.L.C. All Rights Reserved.
No portion of this site may be copied, retransmitted, reposted, duplicated or otherwise used
without the express written permission of Simple Step L.L.C., 12 West Owassa Turnpike, Newton, NJ USA 0786 Last modified:
July 22, 2009
