SSXYQE - Dual axis stepper controller with built in Quadrature encoder interface

• 30 MHz Microprocessor Controllers.
• User Programmable Baud Rates (9600, 19.2K, 38.4K, 57.6K (default), 115.2K).
• Multiple boards on a single serial port and the ability to intermix Simple Step board types on the network
• On Board network address switch select on every board.
• Choice of the Simple Step® Network RS232 or RS422/RS485 communications.
• Option Connector for later add-on or custom boards.
• Two (2) User Controlled Open Collector Output Lines (1- 20 ma and 1-500ma).
• Two (2) User Controlled Input Lines.
• Software Programmable Home Sensor Check.
• Diode protected Home Sensor.
• On Board 5 volt Switcher and Power LED.
• Heatsink Mounted to the PC Board.
• Small Board Size   5.3" x 4.2" x 1.3" (with heat sink)
• Large Dynamic Velocity range (from 1 steps per second to 15,000 steps per second with motors <= 5 mH per phase) per motor.
• User Programmable Motor Power Settings (Full,1/4,OFF)
• Synchronous Motor Movements with ALL Boards on the network (Up to 40 motors on 1 serial line)!
• Limit Switch Input (per axis).
• Optical Motor Home input (per axis).
• EMI (radiated) filtering on all boards to allow FCC and CE approvals.
• User programmable advanced acceleration and deceleration settings based on User Programmable Start Velocity, End Velocity and Slope.
• User Programmable Half and Full step control (per axis).
• Two (2) Bipolar Stepper motor drives.
• Single 7.0 - 46.0VDC operation.
• Up to 2 amp/phase, switching mode current controlled motor phase outputs (Hardware adjusted per axis).
• Up to 65534 steps of motion (27.30625 feet with a user mechanical resolution of 0.005 inches per step).
• Counting speeds up to 15,000 steps per second (each channel).
• 2 Quadrature Encoders per board.
• User programmable counting directions.
• Counting from -2,147,483,648 to +2,147,483,647 steps.
• User programmable x1 or x4 counting modes.
• Simple ASCII command set allowing use of standard PC communications packages.
• SSWin Program FREE with each purchase. (Windows 95/98/NT/2000/XP/Vista)
• Optional Internal 2K, 4K, 8K and 16K of User Programmable on board EEPROM (Flash).
• Programming language for EEPROM with decision branches based on User Input States (used with above Option).
• Optional 32 bit movement (2,147,483,647 steps).
• Optional RTOS (Real-Time Operating System).

Prices does not include tax (if applicable), shipping and handling.

Educational :
Automatic 5% off on all prices listed above.

Click here to download the SSXYQE Specification sheet in Adobe Version 3.0 PDF

Click here to Download AutoCAD R13 drawing of the SSXYQE PCB outline.

Download the latest Simple Step Complete manual for all our boards including the General Information Guide in Adobe PDF Version 3.0 Format (1.87M).

Download U.S. Digital's Spec. Sheet for their E2 Quadrature Encoder (<319k).

Download U.S. Digital's Spec. Sheet for the HEDS Quadrature Sensor used in their products (30k).

     Call today for quantity pricing and delivery. Large and small orders are welcome. Simple Step® for Windows included with every purchase.