SSXYMicro - Dual axis microstepping stepper controller

• RoHS compliant.
• RTOS, 32 bit and 8K IEEPROM standard.
• 59 MHz Microprocessor Controller.
• Limit Switch Input (per axis).
• Optical Motor Home input (per axis).
• User programmable advanced acceleration and deceleration settings based on User Programmable Start Velocity, End Velocity and Slope. (per axis)
• User Programmable Full, 1/2, 1/4, 1/8, 1/16 and 1/32 step control (per axis).
• One (1) Bipolar Stepper motor drive (per axis).
• Single 15.0 - 50.0VDC operation.
• Up to 1.5 amp/phase, switching mode current controlled motor phase outputs (Software adjusted per axis).
• User Programmable Baud Rates (9600, 19.2K, 38.4K, 57.6K (default), 115.2K, 230.4K and 460.8K).
• Multiple boards on a single serial port and the ability to intermix Simple Step board types on the network
• Software network address switch select on every board.
• Simple Step® Network RS232 and RS422/RS485 communications (jumper selectable).
• RS422/485 120 ohm balance resistors on board (jumper selectable).
• Option Connector for later add-on or custom boards.
• Two (2) User Controlled Open Collector Output Lines (2-500ma Sink) (per axis).
• Three (3) User Input Lines (per axis).
• Software Programmable Home Sensor Check (per axis).
• Diode protected Home and Limit Sensor.
• On Board 3.3VDC and 5DC volt switchers with Power LED.
• SSXYMicro board Size 5.3" x 4.2" x 0.6"
• Large Dynamic Velocity range (from 1 step per second to 30,000 steps per second) per motor.
• Prescaler installed on all units.
• Software Programmable Motor Power Settings (256 power levels!) (per axis)
• Synchronous Motor Movements with ALL SSCB , SSCBHC, SSMicro, SSXYQE, SSXYMicro, SSXYZMicro and SSXYZ Boards on the network (Up to 40 motors on 1 serial line)!
• Up to +/- 2,147,483,647 steps of motion.
• EMI (radiated) filtering on all boards to allow FCC and CE approvals.
• Simple ASCII command set allowing use of standard PC communications packages.
• Decimal or Hexadecimal ASCII numeric values can be used  (per axis).
• 8000 Character IEEPROM program buffer (per axis for -3A and shared for -3B versions).
• Jog control for each axis (per axis).
• Single-ended Quadrature Encoder interface (per axis)
• SSWin Program FREE with each purchase. (Windows 95/98/NT/2000/XP/Vista)

Prices does not include tax (if applicable), shipping and handling.

Educational :
Automatic 5% off on all prices listed above.

Click here to download the SSXYMicro Specification sheet in Adobe Version 3.0 PDF

Click here to Download AutoCAD R13 drawing of the SSXYMicro PCB outline.

Download the latest Simple Step Complete manual for all our boards including the General Information Guide in Adobe PDF Version 3.0 Format (1.87M).

     Call today for quantity pricing and delivery. Large and small orders are welcome. Simple Step® for Windows included with every purchase.