The SSCBHC is a single axis motion control board that
is economical and smart. This board (like all our other motion control products) comes
complete and ready to run. Just connect a PC, Power Supply and Motor and you are ready to
start moving motors! The Simple Step®
board has all the features found in today's very expensive stepper controllers. Some of
the features are as follows :
- 30 MHz Microprocessor Controller.
- User Programmable Baud Rates (9600, 19.2K, 38.4K, 57.6K (default), 115.2K).
- Multiple
boards on a single serial port and the ability
to intermix Simple Step board types on the network
- On Board network address switch select on every
board.
- Choice of the Simple Step®
Network RS232 or RS422/RS485 communications.
- Option Connector for later add-on or custom boards.
- Two (2) User Controlled Open Collector Output Line (1-20 ma and 1-500ma).
- Two (2) User Controlled Input Lines.
- Software Programmable Home Sensor Check.
- Diode protected Home Sensor.
- On Board 5 volt Switcher and Power LED.
- Heatsink Mounted to the PC Board.
- Small Board Size 6.0"x 5.5" x 2.1" (with
heat sinks)
- Large Dynamic Velocity range (from
1 step per second
to 15,000steps per second) per motor.
- User Programmable Motor Power Settings (256 Levels for Maximum
Power Setting and from 100% to 0% of Maximum Power setting for Motor Idle mode.)
- Synchronous Motor Movements with ALL SSCB and SSXYZ Boards on the network (Up to 40 motors on 1 serial line)!
- Limit Switch Input.
- Optical Motor Home input.
- User programmable advanced acceleration and deceleration settings based on User
Programmable Start Velocity, End Velocity and Slope.
- User Programmable 1/1, 1/2, 1/4, 1/8, and 1/16 step control.
- Bipolar Stepper motor drive.
- Single 13.5 - 45.5VDC operation.
- Up to 6.25 amp/phase, switching mode current controlled motor phase outputs (Software adjusted).
- Up to 65534 steps of motion (27.30625 feet with a user
mechanical resolution of 0.005 inches per step).
- Prescaler installed on all units.
- Decimal or Hexadecimal ASCII numeric values can
be used.
- 400 Character IEEPROM buffer for all non-EEPROM
versions.
- Jog control for each axis.
- EMI (radiated) filtering on all boards to allow
FCC and CE approvals.
- Simple ASCII command set allowing use of standard PC communications packages.
- SSWin Program FREE with each purchase. (Windows
95/98/NT/2000/XP)
- Optional Internal 2K,
4K, 8K and 16K of User Programmable on board EEPROM
(Flash).
- Programming language for EEPROM with decision branches based on
User Input States (used with
above Option).
- Optional 32
bit movement (2,147,483,647
steps).
- Optional
RTOS (Real-Time Operating System).
Prices does not include tax (if applicable), shipping and
handling. All options (32, IEEPROM, RTOS) are now based
on a flat rate system for all XA Products.
| Qty |
Standard Unit
SSCBHC |
32
bit |
2K |
4K |
8K |
16K |
RTOS |
| 1 - 9 |
$482.00 (US) |
+$5.00 |
+$4.50 |
+$6.50 |
+$7.00 |
+$8.00 |
+$12.00 |
| 10 - 24 |
$464.00 |
+$4.50 |
+$4.00 |
+$5.80 |
+$6.75 |
+$7.75 |
+$11.50 |
| 25 - 49 |
$428.00 |
+$4.00 |
+$3.50 |
+$5.20 |
+$6.25 |
+$7.25 |
+$11.00 |
| 50-99 |
$414.00 |
+$3.50 |
+$3.00 |
+$4.90 |
+$5.75 |
+$6.75 |
+$10.50 |
Educational :
Automatic 5% off on all prices
listed above.
 Click here to download the SSCBHC
Specification sheet in Adobe Version 3.0 PDF
Click here to Download AutoCAD R13
drawing of the SSCBHC PCB outline.
Download
the latest Simple Step Complete manual for all our boards including the General
Information Guide in Adobe PDF Version 3.0 Format (1.87M).
Call today for quantity pricing and delivery. Large and small
orders are welcome. Simple Step® for Windows included with every purchase.
Information :
You can get more information on
pricing,
delivery, and general questions by clicking here. |
