The SSXYQE is a dual axis motion control board that is
economical and smart. This board (like all our other motion control products) comes
complete and ready to run. Just connect a PC, Power Supply and Motor and you are ready to
start moving motors! The Simple Step®
board has all the features found in today's very expensive stepper controllers. Some of
the features are as follows :
- 30 MHz Microprocessor Controllers.
- User Programmable Baud Rates (9600, 19.2K, 38.4K, 57.6K (default), 115.2K).
- Multiple
boards on a single serial port and the ability
to intermix Simple Step board types on the network
- On Board network address switch select on every
board.
- Choice of the Simple Step®
Network RS232 or RS422/RS485 communications.
- Option Connector for later add-on or custom boards.
- Two (2) User Controlled Open Collector Output Lines (1- 20 ma and 1-500ma).
- Two (2) User Controlled Input Lines.
- Software Programmable Home Sensor Check.
- Diode protected Home Sensor.
- On Board 5 volt Switcher and Power LED.
- Heatsink Mounted to the PC Board.
- Small Board Size 5.3" x 4.2" x 1.3" (with
heat sink)
- Large Dynamic Velocity range (from 1 steps per second
to 15,000 steps per second with motors <= 5
mH per phase) per motor.
- User Programmable Motor Power Settings (Full,1/4,OFF)
- Synchronous Motor Movements with ALL Boards on the
network (Up to 40 motors on 1 serial line)!
- Limit Switch Input (per axis).
- Optical Motor Home input (per axis).
- EMI (radiated) filtering on all boards to allow
FCC and CE approvals.
- User programmable advanced acceleration and deceleration settings based on User
Programmable Start Velocity, End Velocity and Slope.
- User Programmable Half and Full step control (per axis).
- Two (2) Bipolar Stepper motor drives.
- Single 7.0 - 46.0VDC operation.
- Up to 2 amp/phase, switching mode current controlled motor phase outputs (Hardware adjusted per axis).
- Up to 65534 steps of motion (27.30625 feet with a user
mechanical resolution of 0.005 inches per step).
- Counting speeds up to 15,000 steps per second (each channel).
- 2 Quadrature Encoders per board.
- User programmable counting directions.
- Counting from -2,147,483,648 to +2,147,483,647 steps.
- User programmable x1 or x4 counting modes.
- Simple ASCII command set allowing use of standard PC communications packages.
- SSWin Program FREE with each purchase. (Windows
95/98/NT/2000/XP)
- Optional Internal 2K,
4K, 8K and 16K of User Programmable on board EEPROM
(Flash).
- Programming language for EEPROM with decision branches based on
User Input States (used with
above Option).
- Optional 32
bit movement (2,147,483,647
steps).
- Optional
RTOS (Real-Time Operating System).
Prices does not include tax (if applicable), shipping and
handling.
| Qty |
Standard Unit
SSXYQE |
32
bit |
2K |
4K |
8K |
16K |
RTOS |
| 1 - 9 |
$340.00 (US) |
+$5.00 |
+$4.50 |
+$6.50 |
+$7.00 |
+$8.00 |
+$12.00 |
| 10 - 24 |
$333.00 |
+$4.50 |
+$4.00 |
+$5.80 |
+$6.75 |
+$7.75 |
+$11.50 |
| 25 - 49 |
$327.00 |
+$4.00 |
+$3.50 |
+$5.20 |
+$6.25 |
+$7.25 |
+$11.00 |
| 50-99 |
$307.00 |
+$3.50 |
+$3.00 |
+$4.90 |
+$5.75 |
+$6.75 |
+$10.50 |
Educational :
Automatic 5% off on all prices
listed above.
 Click here to download the
SSXYQE Specification sheet in Adobe Version 3.0 PDF
Click here to Download AutoCAD R13 drawing
of the SSXYQE PCB outline.
Download
the latest Simple Step Complete manual for all our boards including the General
Information Guide in Adobe PDF Version 3.0 Format (1.87M).
Download
U.S. Digital's Spec. Sheet for their E2 Quadrature Encoder (<319k).
Download
U.S. Digital's Spec. Sheet for the HEDS Quadrature Sensor used in their products (30k).
Call today for quantity pricing and delivery. Large and small
orders are welcome. Simple Step® for Windows included with every purchase.
Information :
You can get more information on
pricing,
delivery, and general questions by clicking here. |
Send mail to webmaster@simplestep.com
with questions or comments about this web site.
Copyright © 1997-2008 Simple Step L.L.C. All Rights Reserved.
No portion of this site may be copied, retransmitted, reposted, duplicated
or otherwise used
without the express written permission of Simple Step L.L.C., 12 West Owassa
Turnpike, Newton, NJ USA 07860
Last modified:
January 08, 2008
Copyright and Trademark Information |
